Evans Special Edition Models
Each Special Edition Evans pickup receives Rod's personal attention. Sets are
matched and Rod himself will sign, number and catalog each Special Edition
pickup providing you with assurance of the highest quality.
The Eliminator Series Pickups are direct replacements for all single-coil
pickups and are designed to slip into position with no
modifications. Installation is a snap too as Evans uses a convenient three-pin
clip making hookup quick and clean.
|
Single Coils |
|
| Classic
Lead (E1CL) |
For lead (bridge)
position E1CL features a bright, chunky sound with an increase in
volume over standard single-coil pickups. |
| Hot Lead
(E1HL) |
A high output version
of E1CL for lead position. E1HL is designed for over drive and high
volume applications. |
| Rhythm
(E1R) |
For middle or neck
position. E1R features that same super quiet performance with a rich
rhythm tone and there’s no “fadeout” when bending strings. |
| Hot Rhythm
(E1HR) |
A high output
version of E1R. |
|
Eliminator 1 Series Models
Single Coils
| E1CL |
Classic Lead
|
| E1HL |
Hot Lead |
| E1R |
Rhythm |
| E1HR |
Hot Rhythm |
|
|
Humbuckers |
|
| Lead (E2L) |
For lead (bridge)
position E2L features a bright, chunky sound with an increase in
volume over standard humbuckers. |
| Rhythm
(E2R) |
For the neck
position. E2R features that same super quiet performance with a
very warm rhythm tone and there’s no “fadeout” when bending strings. |
Eliminator
2 Series Models
Humbuckers
The humbuckers can be tapped. In the
tapped position, they will deliver a great single coil sound that is
every bit as quiet as the series 1 single coils. |
 |
 |
Available Colors
Red
White (Ivory)
Black |
Warranty
Evans pickups
carry a 5 year transferable warranty subject to the conditions set forth
below, that should these pickups be defective by reason of improper
workmanship or material failure during the specified warranty period, the
pickups will be repaired or replaced.
Conditions
Contact Us First:
You MUST contact us first and we will issue you an RMA number. As well, we
will ask that you have checked the pickup to ensure that it is in fact the
pickup and not your wiring or some other component failure on your guitar.
We will be adding a “How to test your Evans Pickup” link in the Tech Tips
section of this site very soon. Once you have contacted us and confirmed
that it is indeed your pickup which is faulty, we will issue you an RMA
number and your will need to use that number when shipping the product
back to us.
Unauthorized Repair And Abuse:
The pickup must not have been previously altered, modified or serviced in
any way. Of course, this does not include installing the pickup in your
guitar. The pickup must not have been subject to accident, misuse, abuse
or operated contrary to the instructions included with the pickup.
Delivery:
The pickup must be shipped freight pre-paid in it’s original packaging or
similar packaging that will give the pickup the same level of protection
(padding etc.). You must include instructions indicating an address to
ship the pickup back to. It will be shipped back to you freight pre-paid
in North America. Shipments outside of North America will incur an
additional shipping charge which we will disclose to you when you contact
us for an RMA number.
Proof of Purchase
You will need your proof of purchase. Keep your receipts indicating date
of purchase. If you sell your pickups, be sure to give this to the new
owner.
